SeaBoats | |
P.O. Box 6261 , Christchurch, New Zealand | |
Contact: | Geoff Fraser |
Telephone: | Reveal Telephone Number |
View All SeaBoats Listings |
Built: 2024 (under construction). Class: BV, I ? Hull ? Mach, Special Service, Multi Purpose Work Boat, Tug, Coastal Area, IWS. Construction: Marine Steel. Speed: 9 knots. Main Engine: 2 x Doosan 550 HP @ 2100 RPM. Bollard Pull: ˜ 13 ton.
Date Launched: 2024 (Under Construction) Length: 22.00m (72ft 2.14in) Beam: 9.00m (29ft 6.33in) Draft: 2.20m (7ft 2.61in) Note: Main Engine: 2 x Doosan 550 HP @ 2100 RPM Location: Turkey
Condition: | Under Construction |
Vessel type: | Commercial Vessels / Work Boats / Multi Purpose Workboats |
Constructed: | 2025 |
Class Society: | BV |
Cabins: | 4 |
No. of engines: | 2 |
Engine model: | Doosan |
Engine power: | 550 |
Maximum Speed: | 9 Knots |
Nominal length: | 22m |
Length over all: | 22m |
Beam: | 9m |
Maximum draft: | 2.20m |
Hull material: | Steel |
Fuel capacity: | 34 Cubic Metres |
Water capacity: | 18 Cubic Metres |
Holding tank capacity: | 2 Cubic Metres |
Comfortable AC accommodation
Cabins for 5 persons – 1 x Master, 2 x Single and 1 x Double,
Galley, Messroom, W/C-Shower
Fire & Safety as per rules, CO2 Fi-Fi Sys. for ER
Built: 2024 (under construction)
Construction: Marine Steel
Length Overall: 22.00 m
Beam Overall: 9.00 m
Depth @ sides: 2.85 m
Draught (max): 2.20 m
Deck Workshop Area: ≈ 80 m²
Deck Load: 3 t / m²
MDO ≈ 34 m³
Cargo Fresh Water: 2 x ≈ 18 m³
Ballast Water: ≈ 48 m³
Sewage: ≈ 2 m³
Bilge: ≈ 0.6 m³
Anchor: 2 x 210 kg VHHP
Anchor Winch: DTC2001 E/7, 1800Kg
Tugger Winch: DTC5000 HPL, Single drum, 5 T
Crane: 1 x TLG ≈ 105 T.m (Class load attestation)
Compliance for Carrying Dangerous Good
Suitable for 20’-Container on deck
Bencros Fenders
Koden: Marine Radar + GPS/GPS Compass + Chart Plotter + Echo Sounder
Sailor-VHF DSC (Class.A) + ICOM-VHF DSC (Class.D) + NAVTEX,
Jotron-Portable GMDSS + Victron Battery Charger + AIS + EPIRB + SART,
SIMRAD-Autopilot
Zenitel-Batteryless Telephone Sys. + Talk-Back Sys.
J.Lilley&Gillie-Magnetic Compass
CCTV w 4 camera
Speed: 9 knots
Main Engine: 2 x Doosan 550 HP @ 2100 RPM
Gearbox: 2 x Dong-I r ≈ 5,04:1
Propulsion: 2 x FPP, Ø ≈ 1250 mm
Bollard Pull: ≈ 13 ton
Electro-Hydraulic Steering Gear, DDS 2*550, 35°-0-35°
Auxiliary Genset: 2 x Doosan 77 kW
Air Compressor: 1 x DKC-200, 14 ½ m³ / h @ 8bar
380 VAC 50 Hz – 220VAC 50 Hz & 24 VDC
Class: BV, I + Hull + Mach, Special Service, Multi-Purpose Work Boat, Tug, Coastal Area, IWS
The particulars and specifications are supplied by the vendor and not SeaBoats. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.
Note: Indicated location is approximate general area only.