Description

Kingfisher is fitted with the boater’s favourite item, a solid fuel stove. She also has a very well equipped and practical galley.

She was originally fabricated with a 12mm bottom plate, which is 2mm thicker than the standard 10mm, giving extra protection from problems in the long term. This also reduces the amount of ballast required, below floor level, to achieve the correct appearance in the water.

In the lounge area the seating is made up of a sofa and a 4 seater Pullman Dinette. She has four berths made up of two singles, which can be made into a double, at the rear of the boat and a double achieved by converting the Pullman Dinette.

The vessel had a small refit in 2018 with the replacement of galley equipment.

This boat would be perfect for any leisure boater that wants a bit more space than is found on the more typical 45ft to 50ft examples.

However, as there is a private room at the back, she may also suit a continuous cruiser.

The boat is priced competitively and is ready to sale away.

Specification

• DW Engineering Hull Builders
• Original Steel Plating: 12/6/4 mm
• Cabin Headroom 6’3”
• Draught 34 inches approx
• Boat Safety until 10/2026
• Stove : Franco Belge Belfort
• Hot Water: Engine
• 1 Starter and 4 Leisure batteries
• Barrus Shire 40 Engine
• Last blacked 2020
• Boat Safety due 2026
• Thetford Cassette CS263 with spare cassette.
• Solar Panels
• 2 Gas bottles
• Comes fitted with Cratch and Tonneau covers for bow and stern.

Specifications

Accommodation

Location Map