Co Tipperary Ireland
6 Berth well maintained cruiser. Renovated in 2012 with a 18,000.00 investment at that time. Twin keel , very safe sturdy boat for both sea and inland waterways. Perkins 4236 engine, serviced yearly. Shore power. Hot and cold water.Toilet and shower. Fridge and gas cooker. Professional gas inspection carried out. Fire extinguishers, carbon monoxide alarms. Bathing deck and ladder. Memory foam bed.
|Vessel type:||Profile 33|
|Builder:||Profile Marine of Bursledon|
|Fit Out:||Aft Cockpit ,enclosed Wheelhouse|
|No. of engines:||1|
|Engine model:||Perkins 4236|
|Drive type:||Shaft drive|
|Length over all:||33'|
|Maximum draft:||2' 9"|
|Keel type:||Twin Keel|
Engine is a Perkins 4.236 four cylinder normally-aspirated deisel, developing 72bhp@2250rpm. This drives through a Borg Warner 2;1 reduction-gearbox and R&D flexible-coupling to the propeller-shaft, which is sealed by a plain floating stern-gland.
Hull is of displacement type, with a long moulded keel and a pair of bilge-keels amidships. The stem is raked and the transom is radiused. The underwater sections are in very good condition and are anti-fouled. Skin fittings are bronze and in order. A steel skeg of 4x2 " channel is well fixed to the aft end of the keel, extending aft under the propeller. The skeg carries a bottom-bearing for the rudder. Delta-plates are fitted under the propeller.
Sterngear; a 1.5" S/S propeller-shaft emerges through the trailing edge of the keel, where it is supported by the cutlass-bearing held in a bronze carrier, securely-bolted to the hull. A three bladed equipoise 18"x12" propeller is swung. A steel rudder and stock are hung aft.
Top-sides; Are painted wite and in good condition they are protected by an aluminium rubbung-strake with a rubber insert at gunwhale-level. a similar strake runs for two thirds of hull-lenght for'd of the transom at one third of top-sides height.